Heat flux capacity measurement and improvement for the test of superconducting logic circuits in closed-cycle cryostats

Authors: SASAN RAZMKHAH, ALİ BOZBEY

Abstract: With the current progress of superconducting integrated circuits, circuit complexities have reached more than 100,000 Josephson junctions. At the laboratory environment, circuit tests are generally being conducted at liquid Helium environments. With the commercialization of the superconducting integrated circuit-based systems and/or price increase of liquid Helium, utilization of the closed-cycle systems will be inevitable. Even though it is possible to implement closed-cycle systems with quite substantial excess cooling powers after all the wirings and peripheral circuits, one point not to be overlooked is the power density at the superconducting chips. We have observed that the circuits designed for operation at liquid Helium bath have much higher power densities that exceed the heat flux capacities of closed-cycle cryocoolers. We have measured that the heat flux capacities of closed-cycle systems are about 0.1 W/cm${}^{2}$ when the chip is in vacuum. Thus, if the power density in any of the bias resistors are higher than these values, it is difficult to keep the chip in superconducting state. With the positive feedback from a local hot spot under current bias, the chip rapidly heats up due to Joule heating. To increase the limit of power density, we propose an encapsulation method that increases the heat flux capacity of the system. With the encapsulation, the heat flux capacity of the system is increased to about 0.4 W/cm${}^{2}$.

Keywords: Superconductivity, single flux quantum, power density, heat flux capacity

Full Text: PDF