Preparation of Fe$_{3}$O$_{4}$ @ montmorillonite composite as an effective sorbent for the removal of lead and cadmium from wastewater samples

Authors: HANDE TINAS, ECE ÇALIŞKAN, NİL ÖZBEK, SÜLEYMAN AKMAN

Abstract: A magnetic Fe$_{3}$O$_{4}$ @ montmorillonite composite was prepared and used for the separation of lead and cadmium from aqueous solutions. For this purpose, magnetite (Fe$_{3}$O$_{4})$ was generated by co-precipitation of FeSO$_{4}$ and FeCl$_{3}$ onto montmorillonite. The effects of various experimental parameters such as pH of the solution, amount of sorbent, initial concentration of analytes, and contact time on the sorption efficiencies of lead and cadmium ions were investigated and optimized by applying a batch technique. The concentrations of analytes were determined by high resolution continuum source flame atomic absorption spectrometry. The maximum adsorption occurred at pH 2.0. The adsorption capacity of Fe$_{3}$O$_{4}$ @ montmorillonite composite was 5 mg g$^{-1}$ Pb and 2 mg g$^{-1}$ Cd. The quantitative retention in acidic medium was an advantage for the removal of metals from acidic water samples. Under optimized conditions, lead and cadmium were quantitatively removed from wastewater (between 95% and 98%) in a contact time of less than 5 min. The results showed that Fe$_{3}$O$_{4}$ @ montmorillonite can be efficiently used for the removal of lead and cadmium from aqueous solutions.

Keywords: Removal, lead, cadmium, Fe$_{3}$O$_{4}$ @ montmorillonite, composite, atomic absorption spectrometry

Full Text: PDF